Why do you need a Dome Port?
It can dramatically improves camera’s underwater functionality and image quality by moving the waterline away from the GoPro lens,you can capture the amazing half underwater half above-water photos.Without the dome,you will get a split photo.
Upgrade Version–It’s with lens hood, which reducing lens flare, and protecting the lens from damage
How to set up your dome?
1. Unscrew the screws to lift the clamp and remove the GoPro housing from the dome.
2. Put your GoPro camera into the housing and close it.
3. Attach the grip to the housing so that the bolt is on the left when your camera is facing away from you. This gives you better access to camera power button.
4. Insert the housing into the dome and make sure it sits right.
5. Close the clamp over the housing and tighten the clamping screws until there is no space left between the screws and the dome.
6. Use the power_button_symbol button on the dome to turn your GoPro ON/OFF or change modes.
7. Remaining two buttons on your GoPro camera work as on your regular housing.
Always rinse the dome with fresh water after seawater use.
If for some reason you need to clean the dome from the inside, you should use a tool to remove all 10 screws that hold the dome in place. Make sure the dome port is clean before removing the dome.Once your dome is cleaned re-attach it to the backplate,Tighten the screws until you get resistance, don’t over tighten them.
1.All products sold by SHOOT Official are covered by 12 months warranty.
2.If you are not satisfied when you receive your item,or have any problem in using the product,please feel free to contact us,we will answer you within 24 hours.【Specification】Designed for Gopro Hero 5/Hero 6 Black Action Camera,Package size:9.84 inch x 8.27 inch x 4.72 inch(25cmx21cmx12cm),Martial:PC+ABS,it can be used underwater 30m(Maximum)
【Half over, Half Underwater Shots 】If you want to capture 50/50 images and improve your camera underwater shots,then you need a dome port.By moving the waterline away from the camera lens,it allows you to make those sick split photo shots to be shown excellently.
【Easy to Use and Clean】No other accessories are needed,just insert your camera and you are ready to go.The side of the base has 10 screw,this design allows the dome to be fully disassembled for cleaning.(Kindly Note:When you using your original GoPro waterproof housing with this dome,please mount the 2pcs silicone rubbers to the backdoor frame as the picture shows.)
【Secure Waterproof Sealing】To make sure the dome’s waterproof ability,our factory did the Hydrostatic Water Pressure Test for every dome.But for the sake of insurance,we highly recommend you to test it without using your gopro before diving.
【12 Months Warranty】All products sold by SHOOT Official are covered by 12 months warranty.